Posted

print

favorite this post Community Solutions SLS 960 Professional Loudspeakers SLS960 - $450 (Fargo) hide this posting unhide

condition: excellent
make / manufacturer: Community
model name / number: SLS960

Selling a pair of Community Solutions SLS 960 Speakers. If you know what these are there is no description needed. High end setup for your band or space. Were $4500 EACH new.

The Community Solutions SLS960 loudspeaker is a high output, high sensitivity, horn-loaded, three-way, full-range loudspeaker system with an integral one-piece fiberglass baffle of Wavefront Coherent™ design. It provides excellent full-range musical and exceptional voice reinforcement.

Engineered for use in portable or permanent installations, the loudspeaker enclosure is constructed of void-free, heavily braced Baltic plywood with integral steel bracing for vertical or horizontal mounting.

The Solutions Series are designed for electronically-controlled use with a loudspeaker system controller such as Community's dSPEC226 networked loudspeaker processor and may be used in passive or biamp mode.

http://www.communitypro.com/products/solutionsseries/sls960

The Community Solutions SLS960 loudspeaker is a high output, high sensitivity, horn-loaded, three-way, fullrange loudspeaker system with an integral one-piece fiberglass baffle of Wavefront CoherentTM design. It provides excellent full-range musical reinforcement. Engineered for use in portable or permanent installations, the loudspeaker enclosure is constructed of void-free, heavily braced Baltic plywood with integral steel bracing connected to threaded 3/8 in. nuts which provide robust suspension points for vertical or horizontal mounting.

The system may be used in passive mode or switched for bi-amplification. Available in black or white with white grille cover, with or without handles. Five year limited warranty. Use with Community SBS Series loudspeakers. Electronic speaker controller required.

Community SLS960 Specifications:

Loudspeaker Type: 3-way, Electronically controlled,full-range
Operating Range: 75 Hz - 18 kHz, 90 Hz - 18 kHz(+/-3dB)
Max Input (Passive):
400W continuous, 1000W program
57 volts RMS, 126 volts momentary peak
Recommended Power Amp: 830W to 1200W @ 8 Ohms
Max Inputs (Biamp):
LF: (Same as for Passive mode)
Recommended LF Power Amp: (Same as for Passive mode)
MF/HF: 80W continuous, 200W program
25 volts RMS, 57 volts momentary peak
Recommended MF/HF Power Amp: 170W to 240W @ 8 Ohms
Sensitivity 1W/1m:
108 dB SPL (80 Hz - 16 kHz 1/3 octave bands)
109 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output: 134 dB SPL / 141 dB SPL (peak)
Nominal Impedance (passive): 8 Ohms
Min Impedance: 4.1 Ohms @ 340 Hz
Nominal Impedances (Biamp): LF: 8 Ohms, HF: 8 Ohms
Nominal -6dB Beamwidth:
65° H (+18° / -23°, 630 Hz - 16 kHz)
50° V (+28° / -18°, 630 Hz - 16 kHz)
Axial Q / DI: 23.6 / 13.7, 630 Hz - 16 kHz
Crossover Frequencies: 650 Hz / 3 kHz
Recommended Signal Processing:
650 Hz crossover (for biamp)
60 Hz high pass filter
Drivers (Ferrofluid-cooled):
LF (2) 10" cast frame
MF (1) M200 2", non-metallic diaphragm
HF (1) VHF100 1" exit, non-metallic diaphragm
Driver Protection: PowerSense™ DDP
Input Connection:
(2) Neutrik NL4MP
(2) dual banana jacks
Controls: Passive / Biamp switch
Enclosure: 13-ply 18 mm Baltic birch, Polane painted(see options)
Enclosure Hardware: (2) steel, recessed bar handles
Mounting / Rigging Provisions:
(8) 3/8-16 rigging points, W.L.L. 300 lb. vertical pull each
(3) Pull-back points, W.L.L. 60 lb. each
Grille: 16 gauge perforated steel (see options)
Required Accessories: Electronic speaker controller
Supplied Accessories: (4) Rubber feet with mountingscrews
Optional Accessories: 3/8EYBLTKIT: (4) forged 3/8-16eyebolts
Dimensions:
Height: 33.4 in. / 849 mm
Width (front): 19.8 in. / 504 mm
Width (rear): 12.2 in. / 309 mm
Depth: 20.25 in. / 514 mm
Weight: 133.5 lbs. / 60.6 kg
Shipping Weight: 151.5 lbs. / 68.7 kg
  • do NOT contact me with unsolicited services or offers

post id: 6827249259

posted:

updated:

best of [?]